Analysis of synchronous and interleaved converter
This thesis report is submitted in partial fulfilment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2018.
Main Authors: | , , , |
---|---|
Outros autores: | |
Formato: | Thesis |
Idioma: | English |
Publicado: |
BRAC Univeristy
2018
|
Subjects: | |
Acceso en liña: | http://hdl.handle.net/10361/9901 |
id |
10361-9901 |
---|---|
record_format |
dspace |
spelling |
10361-99012019-09-30T04:57:52Z Analysis of synchronous and interleaved converter Nahin, MD. Mohaiminul Islam Fuad, MD. Kamrul Hassan Amin, MD. Abdullah Al Barua, Anik Abedin, Dr. Amina Hasan Department of Electrical and Electronic Engineering, BRAC University Converter Buck converter This thesis report is submitted in partial fulfilment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2018. Catalogued from PDF version of thesis. Includes bibliographical references (page 58). Converter circuits are different kinds of power electronics circuit which analysis the current and voltages from one level to another level with the importance of high efficiency. In the new era of power electronics, the voltages and current can be calculated and thus the power analysis is maintained for effective and stable electronics circuits. For the need of power electronics engineers, the output voltage must be low for the high source voltages for different devices where a buck converter is used. In telecommunication power supply system, buck converter is also used to take care the power quality issues. It is worked on modern electronic devices and telecommunication power supply system by using several mathematical methods of converters. Different power theories are considered to validate the work. Finally, switching frequency is fixed according to operating range. However it cannot make that converter effective and efficient, for that purpose the synchronous and interleaved buck converter is analyzed here. The one of the benefits of interleaving synchronous buck converter is reducing the ripple current which makes that convert more convenient. Moreover for developed electronics devices it may need higher voltages than the source voltages and in that case a boost converter is being used here. Furthermore, for more efficient circuit the interleaved boost converters are analyzed here. One of the major purposes of analyzing interleaved boost converters is the reduction of output voltage ripple over the conventional boost converters which makes the converter more effective. Therefore, it is essential to improve the converter circuits by using the method of interleaving for an efficient system. Later, by varying the duty cycles and the input voltages, the ripple voltages and currents are reduced which provide highest efficiency of that converter hence the efficiency is calculated and is taken the most effective factors of that converter. MD. Mohaiminul Islam Nahin MD. Kamrul Hassan Fuad MD. Abdullah Al Amin Anik Barua B. Electrical and Electronic Engineering 2018-04-26T09:30:26Z 2018-04-26T09:30:26Z 2018 2018-04 Thesis ID 12121025 ID 12121107 ID 12121116 ID 12321064 http://hdl.handle.net/10361/9901 en BRAC University theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. 58 pages application/pdf BRAC Univeristy |
institution |
Brac University |
collection |
Institutional Repository |
language |
English |
topic |
Converter Buck converter |
spellingShingle |
Converter Buck converter Nahin, MD. Mohaiminul Islam Fuad, MD. Kamrul Hassan Amin, MD. Abdullah Al Barua, Anik Analysis of synchronous and interleaved converter |
description |
This thesis report is submitted in partial fulfilment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2018. |
author2 |
Abedin, Dr. Amina Hasan |
author_facet |
Abedin, Dr. Amina Hasan Nahin, MD. Mohaiminul Islam Fuad, MD. Kamrul Hassan Amin, MD. Abdullah Al Barua, Anik |
format |
Thesis |
author |
Nahin, MD. Mohaiminul Islam Fuad, MD. Kamrul Hassan Amin, MD. Abdullah Al Barua, Anik |
author_sort |
Nahin, MD. Mohaiminul Islam |
title |
Analysis of synchronous and interleaved converter |
title_short |
Analysis of synchronous and interleaved converter |
title_full |
Analysis of synchronous and interleaved converter |
title_fullStr |
Analysis of synchronous and interleaved converter |
title_full_unstemmed |
Analysis of synchronous and interleaved converter |
title_sort |
analysis of synchronous and interleaved converter |
publisher |
BRAC Univeristy |
publishDate |
2018 |
url |
http://hdl.handle.net/10361/9901 |
work_keys_str_mv |
AT nahinmdmohaiminulislam analysisofsynchronousandinterleavedconverter AT fuadmdkamrulhassan analysisofsynchronousandinterleavedconverter AT aminmdabdullahal analysisofsynchronousandinterleavedconverter AT baruaanik analysisofsynchronousandinterleavedconverter |
_version_ |
1814307777434091520 |