Real time monitoring and controlled power distribution system with SMART meter to support smart grid
This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2017.
Huvudupphovsmän: | , , , |
---|---|
Övriga upphovsmän: | |
Materialtyp: | Lärdomsprov |
Språk: | English |
Publicerad: |
BRAC Univeristy
2017
|
Ämnen: | |
Länkar: | http://hdl.handle.net/10361/8429 |
id |
10361-8429 |
---|---|
record_format |
dspace |
spelling |
10361-84292019-09-30T03:32:40Z Real time monitoring and controlled power distribution system with SMART meter to support smart grid Nayem, Md. Motiour Rahman Mahmud, Fakhrul Islam Rahman, Ashiq-Ur Jahan, Tanver Azad, Dr. A.K.M Abdul Malek Department of Electrical and Electronic Engineering, BRAC University Power monitoring SD card This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2017. Cataloged from PDF version of thesis. Includes bibliographical references (page 76-78). In order to introduce the smart grid system in Bangladesh, Smart Meter can be the first step to make a change in conventional Billing and metering system. Smart meter is a device that is based on two way communication between consumers and suppliers including Smart monitoring system. In our country, prepaid metering system is available in some areas by DESCO. Digital meter don’t have two way communication facilities and controlling part is not available as well. Smart meter is more reliable compare to digital meter in terms of billing and tampering. Due to real-time monitoring and over-use alarm system, users will be more concern about their electricity usage. At the same time, Government will also be able to monitor power consumption in a better and organized way through the information received from Smart meters. Therefore, this paper basically focuses on the project titled Smart Meter which is designed by BRAC University, Control & Applications Research Centre (CARC). For this project, microcontroller is used in digital electric meters. For current meter, current sensor (ACS712-20A) is used to sense the amount of current which is being consumed. For voltage meter, to get desired and protected analog reading optocoupler has used which can be tolerated by Arduino Uno. Once Arduino converts analog signals to digital signals, measured voltage, current and power factor are multiplied in order to get power at every second and then it sums them up to get the energy consumed. At every second, all the data are stored in SD Card in a text file to back up during power off. Distributors can trip the whole system through a command using database which is made for this project through SocketTest software. Smart monitor is the special feature which is separately boxed and controlled by Arduino Uno from the Main Meter box. Main Meter Monitor is attached with the Arduino Mega and shows the overall power, voltage, current, PF readings in one single tab. Secondary Monitor has three tabs to be controlled with keypad. The overall current (A), voltage (V), power(kWh), PF are the data transferred to Uno. Through this Secondary monitor, consumers will be able to perceive their room-wise electricity consumption, per-unit cost and get notification for over consumption of the electricity.The main motive of this project is to introduce both way communicationsthrough Smart Meterin Bangladesh which is very efficient as well as feasible for the consumers with cheaper price. B. Electrical and Electronic Engineering 2017-08-22T10:25:13Z 2017-08-22T10:25:13Z 2017 2017 Thesis ID 13321064 ID 13321042 ID 13321073 ID 13321023 http://hdl.handle.net/10361/8429 en BRAC University thesis is protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. 84 pages application/pdf BRAC Univeristy |
institution |
Brac University |
collection |
Institutional Repository |
language |
English |
topic |
Power monitoring SD card |
spellingShingle |
Power monitoring SD card Nayem, Md. Motiour Rahman Mahmud, Fakhrul Islam Rahman, Ashiq-Ur Jahan, Tanver Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
description |
This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2017. |
author2 |
Azad, Dr. A.K.M Abdul Malek |
author_facet |
Azad, Dr. A.K.M Abdul Malek Nayem, Md. Motiour Rahman Mahmud, Fakhrul Islam Rahman, Ashiq-Ur Jahan, Tanver |
format |
Thesis |
author |
Nayem, Md. Motiour Rahman Mahmud, Fakhrul Islam Rahman, Ashiq-Ur Jahan, Tanver |
author_sort |
Nayem, Md. Motiour Rahman |
title |
Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
title_short |
Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
title_full |
Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
title_fullStr |
Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
title_full_unstemmed |
Real time monitoring and controlled power distribution system with SMART meter to support smart grid |
title_sort |
real time monitoring and controlled power distribution system with smart meter to support smart grid |
publisher |
BRAC Univeristy |
publishDate |
2017 |
url |
http://hdl.handle.net/10361/8429 |
work_keys_str_mv |
AT nayemmdmotiourrahman realtimemonitoringandcontrolledpowerdistributionsystemwithsmartmetertosupportsmartgrid AT mahmudfakhrulislam realtimemonitoringandcontrolledpowerdistributionsystemwithsmartmetertosupportsmartgrid AT rahmanashiqur realtimemonitoringandcontrolledpowerdistributionsystemwithsmartmetertosupportsmartgrid AT jahantanver realtimemonitoringandcontrolledpowerdistributionsystemwithsmartmetertosupportsmartgrid |
_version_ |
1814309097674113024 |