Robotic arm manipulator for industrial purpose

Robotic arm manipulator for industrial purpose

This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2010.

Dades bibliogràfiques
Autors principals:	Moshi, Md. Adnan Al, Islam, Md. Eftakhairul, Cynthia, Salwa Salam
Altres autors:	Department of Electrical and Electronic Engineering, BRAC University
Format:	Thesis
Idioma:	English
Publicat:	BRAC University 2011
Matèries:	Electrical and electronic engineering
Accés en línia:	http://hdl.handle.net/10361/785

Ítems similars

A multitasking PC based robotic ARM manipulator control system in RT-Linux environment
per: Md. Adnan Al Moshi, et al.
Publicat: (2010)

Mobile robotic ARM manipulation
per: Zaman, Marjana, et al.
Publicat: (2011)

An autonomous industrial robot for loading and unloading goods
per: Jaber Al Rashid, et al.
Publicat: (2015)

Exoskeleton Arm : the first step of real life iron suit
per: Rahman, Md. Sadiur, et al.
Publicat: (2015)

An autonomous robot for waiter service in restaurants
per: Omair, Mohd. Abdullah, et al.
Publicat: (2015)

Pole climbing robot for connecting distribution lines
per: Khalid, Zahra Bakhiar, et al.
Publicat: (2015)

Multi swarm optimization for following robot using RF communication
per: Lira, Sirajum Munia, et al.
Publicat: (2015)

Reverse load flow analysis
per: Asif, Md. Iqbal Hossain, et al.
Publicat: (2014)

A Wireless controlled semi-autonomous fire extinguishing robot to rescue and monitor hazardous
per: Imran Bin, Jafar, et al.
Publicat: (2014)

Performance analysis of a MIMO Optical wireless link with space time block code (STBC)
per: Islam, Md. Zahirul
Publicat: (2011)

Development of a laboratory model to demonstrate load management in a smart grid
per: Azim, Syeda Mayesha, et al.
Publicat: (2014)

Congestion control of wireless radio access network traffic using radio over fiber
per: Sarkar, Md. Mahmudul Hasan, et al.
Publicat: (2014)

Design a solar clean car
per: Mahfuz, Md. Muntashir Bin, et al.
Publicat: (2012)

AC sine wave generation by using SPWM inverter
per: Islam, Md. Sakibul, et al.
Publicat: (2012)

Building an electromechanical robotic structure of wall-e
per: Alam, Md. Firoz, et al.
Publicat: (2015)

Performance analysis of a DWDM optical transport network with crosstalk
per: Md. Fahmid-ul-Islam, et al.
Publicat: (2010)

Development of electric stove for smart use of Solar Photovoltaic energy with national grid
per: Islam, Md. Shariful, et al.
Publicat: (2014)

Design of a single phase AC-AC converter
per: Khan, Md. Imtiaz, et al.
Publicat: (2012)

Optimal power flow considering line loss
per: Banna, Hasanul, et al.
Publicat: (2015)

Application of smart grid system in Bangladesh power system
per: Ali, Md. Iskander
Publicat: (2011)

Acquisition and monitoring of multichannel ECG
per: S. Khan, Md. Mashrur, et al.
Publicat: (2011)

Design of a single phase switch mode AC-DC Converter
per: Surjo, Md. Rafiqur Rahman, et al.
Publicat: (2012)

2nd Generation car security system (2GCSS) : Embedded car security system
per: Rahman, Md. Mashiur, et al.
Publicat: (2013)

Improvement of efficiency for solar photovoltaic cell application
per: Majumder, Khademul Islam, et al.
Publicat: (2011)

Environment friendly solar car
per: Majumder, Md. Golam Shahriar, et al.
Publicat: (2011)

Performance improvement of solar hot water system by reducing solar irradiation from solar collector and solar tank
per: Khan, Bonny Amin, et al.
Publicat: (2011)

Operations of a rescue robot constructed for assisting secondary disaster situations
per: Chowdhury, Shadman Sakib, et al.
Publicat: (2015)

Intelligent classroom management system
per: Islam, Md. Nahal, et al.
Publicat: (2014)

Virtual Mouse: Design and implementation of an accelerometer based wireless mouse
per: Aryan, Arghya Dev Biswas, et al.
Publicat: (2012)

Alternative solar hot water system with multistorage tank
per: Rahman, Md. Asifur, et al.
Publicat: (2010)

Performance analysis of a wireless communication system with smart antenna
per: Sarker, Andre, et al.
Publicat: (2011)

Performance analysis of a space time block coded MIMO system over faded channel
per: Rahman, Md. Asiqur, et al.
Publicat: (2011)

Performance improvement of SHWS by increasing thermal efficiency using insulation materials and optimum position of solar collectors
per: Ferdous, Jannatul, et al.
Publicat: (2012)

Modeling UPS and enhancing the capability by integrating renewable sources
per: Mojumder, Arijit, et al.
Publicat: (2015)

Performance analysis of a free-space MIMO optical wireless link over strong atmospheric turbulences
per: Hasan, Rokibul, et al.
Publicat: (2011)

The evaluation of quality of transformer oil by measuring capacitance
per: Ahmed, Mukul, et al.
Publicat: (2012)

Digitization of the entire traffic system and mitigation of the ongoing traffic crisis across cities of developing nations
per: Yasar, Mohammad Samin, et al.
Publicat: (2015)

Design and development of microcontroller based ECG simulator
per: Uzoshi, Khandaker Raska, et al.
Publicat: (2011)

Development of a touchscreen based slate device with Java application
per: Hamid, Tamanna, et al.
Publicat: (2015)

Development of a prototype voice communication system
per: Mirza, Farisa Rasinka, et al.
Publicat: (2012)