Optimal power flow considering line loss

Optimal power flow considering line loss

This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2014.

Dades bibliogràfiques
Autors principals:	Banna, Hasanul, Ehsan, Md. Samiul, Hussain, Md. Samiul
Altres autors:	Kabir, Dr. S.M. Lutful
Format:	Thesis
Idioma:	English
Publicat:	BRAC University 2015
Matèries:	Electrical and electronic engineering Electric energy
Accés en línia:	http://hdl.handle.net/10361/3990

Ítems similars

Reducing switching losses of resonant inverter
per: Roy, Pinak, et al.
Publicat: (2015)

Reverse load flow analysis
per: Asif, Md. Iqbal Hossain, et al.
Publicat: (2014)

Analysis and development of I-V characteristics models for nanometer size MESFETs considering fabrication parameters
per: Mostofa, Jobia, et al.
Publicat: (2011)

Current-Voltage characteristics of carbon Nanotube field effect transistor considering Non-Ballistic conduction
per: Rouf, Nirjhor Tahmidur, et al.
Publicat: (2014)

Multi swarm optimization for following robot using RF communication
per: Lira, Sirajum Munia, et al.
Publicat: (2015)

Application of smart grid system in Bangladesh power system
per: Ali, Md. Iskander
Publicat: (2011)

Reliability analysis of Bangladesh power system
per: Yasmin, Farzana, et al.
Publicat: (2013)

Design and optimization of vision based light control system for smart departmental store
per: Sen, Shuvashish
Publicat: (2014)

Improvement of power quality of CFL bulbs using active power factor correction circuit
per: Modak, Sudipta, et al.
Publicat: (2015)

Design of photovoltaic power conditioning incorporating maximum power point tracking of solar cell
per: Syeed, Nuzhat Noor, et al.
Publicat: (2011)

Solar powered traffic sensitive automated LED street lighting system
per: Ahmed, Sanjana, et al.
Publicat: (2013)

Contingency analysis and reliability evaluation of Bangladesh power system
per: Ahmad, Shahriar, et al.
Publicat: (2011)

Efficiency of IPS and its effect on Bangladesh Power systems
per: Sarwar, Rashed
Publicat: (2010)

Effect of daylight saving time on Bangladesh power systems
per: Sarwar, Rashed, et al.
Publicat: (2011)

Development of an electromagnetic vibrational energy harvesting system
per: Nizam, Rafquat, et al.
Publicat: (2014)

Performance analysis of a DWDM optical transport network with crosstalk
per: Md. Fahmid-ul-Islam, et al.
Publicat: (2010)

System design and circuit implementation of a solar powered car
per: Khatun, Karima, et al.
Publicat: (2014)

Complete analytical model of GaN MESFETs for high power and Microwave frequency applications
per: Shanta, Aysha Siddique, et al.
Publicat: (2012)

Design of an often cost affective wind power system for a remote Bangladesh locality
per: Mirza, Rifat, et al.
Publicat: (2011)

Pole climbing robot for connecting distribution lines
per: Khalid, Zahra Bakhiar, et al.
Publicat: (2015)

Design of a charge controller circuit with Maximum Power Point Tracker (MPPT) for Photovoltaic system
per: Rahman, Shusmita, et al.
Publicat: (2013)

Performance analysis of a MIMO Optical wireless link with space time block code (STBC)
per: Islam, Md. Zahirul
Publicat: (2011)

Design of a single phase switch mode AC-DC Converter
per: Surjo, Md. Rafiqur Rahman, et al.
Publicat: (2012)

2nd Generation car security system (2GCSS) : Embedded car security system
per: Rahman, Md. Mashiur, et al.
Publicat: (2013)

Acquisition and monitoring of multichannel ECG
per: S. Khan, Md. Mashrur, et al.
Publicat: (2011)

Environment friendly solar car
per: Majumder, Md. Golam Shahriar, et al.
Publicat: (2011)

Design a solar clean car
per: Mahfuz, Md. Muntashir Bin, et al.
Publicat: (2012)

An autonomous industrial robot for loading and unloading goods
per: Jaber Al Rashid, et al.
Publicat: (2015)

AC sine wave generation by using SPWM inverter
per: Islam, Md. Sakibul, et al.
Publicat: (2012)

The effects of electric field on microorganisms in semi-liquid and liquid edible food substances
per: Rahman, Adel Basher, et al.
Publicat: (2015)

Virtual Mouse: Design and implementation of an accelerometer based wireless mouse
per: Aryan, Arghya Dev Biswas, et al.
Publicat: (2012)

Alternative solar hot water system with multistorage tank
per: Rahman, Md. Asifur, et al.
Publicat: (2010)

Robotic arm manipulator for industrial purpose
per: Moshi, Md. Adnan Al, et al.
Publicat: (2011)

Development of electric stove for smart use of Solar Photovoltaic energy with national grid
per: Islam, Md. Shariful, et al.
Publicat: (2014)

A multitasking PC based robotic ARM manipulator control system in RT-Linux environment
per: Md. Adnan Al Moshi, et al.
Publicat: (2010)

Performance analysis of a space time block coded MIMO system over faded channel
per: Rahman, Md. Asiqur, et al.
Publicat: (2011)

Modeling UPS and enhancing the capability by integrating renewable sources
per: Mojumder, Arijit, et al.
Publicat: (2015)

Digitization of the entire traffic system and mitigation of the ongoing traffic crisis across cities of developing nations
per: Yasar, Mohammad Samin, et al.
Publicat: (2015)

Performance analysis of a free-space MIMO optical wireless link over strong atmospheric turbulences
per: Hasan, Rokibul, et al.
Publicat: (2011)

The evaluation of quality of transformer oil by measuring capacitance
per: Ahmed, Mukul, et al.
Publicat: (2012)