People mover project (control system part)

People mover project (control system part)

This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2011.

Bibliografische gegevens
Hoofdauteurs:	Bhuyan, Shayla Azad, Siddqui, Choudhury Tanzia, Chowdhury, Sazia Afrin, Zafarullah, Md. Kazi
Andere auteurs:	Azad, A.K.M. Abdul Malek
Taal:	English
Gepubliceerd in:	BRAC University 2011
Onderwerpen:	Electrical and electronic engineering
Online toegang:	http://hdl.handle.net/10361/1512

Gelijkaardige items

The people mover project
door: Mousumi, Mahfuza Khanom, et al.
Gepubliceerd in: (2011)

People mover project (communication system)
door: Islam, Nafeez, et al.
Gepubliceerd in: (2011)

Models for Movers
door: Oâ€™Carroll

Dynamic electrical model of sealed lead-acid battery for EV simulation
door: Tariq, Rayyan, et al.
Gepubliceerd in: (2014)

A multitasking PC based robotic ARM manipulator control system in RT-Linux environment
door: Md. Adnan Al Moshi, et al.
Gepubliceerd in: (2010)

Congestion control of wireless radio access network traffic using radio over fiber
door: Sarkar, Md. Mahmudul Hasan, et al.
Gepubliceerd in: (2014)

Designing of an office appliance system using temperature sensor & micro controller for efficient use of electricity
door: Das, Rajat, et al.
Gepubliceerd in: (2013)

Performance comparison of medium access control schemes for IEEE 802.11
door: Ahmed, Lubna, et al.
Gepubliceerd in: (2012)

Designing smart charge controller for the solar battery charging station (SBCS)
door: Ferdausi, Marufa
Gepubliceerd in: (2013)

An automatic monitoring and control system inside greenhouse
door: Hassan, Md. Niamul, et al.
Gepubliceerd in: (2015)

Design and optimization of vision based light control system for smart departmental store
door: Sen, Shuvashish
Gepubliceerd in: (2014)

A Wireless controlled semi-autonomous fire extinguishing robot to rescue and monitor hazardous
door: Imran Bin, Jafar, et al.
Gepubliceerd in: (2014)

Design of a charge controller circuit with Maximum Power Point Tracker (MPPT) for Photovoltaic system
door: Rahman, Shusmita, et al.
Gepubliceerd in: (2013)

The effects of electric field on microorganisms in semi-liquid and liquid edible food substances
door: Rahman, Adel Basher, et al.
Gepubliceerd in: (2015)

Development of electric stove for smart use of Solar Photovoltaic energy with national grid
door: Islam, Md. Shariful, et al.
Gepubliceerd in: (2014)

Performance and control of electrical machines /
door: O'Kelly, Denis
Gepubliceerd in: (1991)

An autonomous industrial robot for loading and unloading goods
door: Jaber Al Rashid, et al.
Gepubliceerd in: (2015)

Performance analysis of a DWDM optical transport network with crosstalk
door: Md. Fahmid-ul-Islam, et al.
Gepubliceerd in: (2010)

Data processing through biosensors and development of simulation software in RTlinux
door: Razin, Kazi Mohammad, et al.
Gepubliceerd in: (2011)

Data processing through biosensors and development of simulation software in windows & RT-Linux
door: Razin, Kazi Mohammed, et al.
Gepubliceerd in: (2012)

Optimal power flow considering line loss
door: Banna, Hasanul, et al.
Gepubliceerd in: (2015)

Development of the monitoring and the lighting system of an electric vehicle
door: Atiya, Dewan Nawshin, et al.
Gepubliceerd in: (2015)

Software implementation of the Central Solar Battery Charging Station (CSBCS)
door: Islam, Farha, et al.
Gepubliceerd in: (2013)

Designing a radio frequency controlled biomimetic flying bird
door: Adnan, Nahid Hasan, et al.
Gepubliceerd in: (2014)

Performance analysis of a MIMO Optical wireless link with space time block code (STBC)
door: Islam, Md. Zahirul
Gepubliceerd in: (2011)

Application of smart grid system in Bangladesh power system
door: Ali, Md. Iskander
Gepubliceerd in: (2011)

Acquisition and monitoring of multichannel ECG
door: S. Khan, Md. Mashrur, et al.
Gepubliceerd in: (2011)

Design of a single phase switch mode AC-DC Converter
door: Surjo, Md. Rafiqur Rahman, et al.
Gepubliceerd in: (2012)

2nd Generation car security system (2GCSS) : Embedded car security system
door: Rahman, Md. Mashiur, et al.
Gepubliceerd in: (2013)

Environment friendly solar car
door: Majumder, Md. Golam Shahriar, et al.
Gepubliceerd in: (2011)

Modeling of synchronous generator for the simulation of Synchroconverter
door: Chowdhury, Monaha, et al.
Gepubliceerd in: (2014)

Design a solar clean car
door: Mahfuz, Md. Muntashir Bin, et al.
Gepubliceerd in: (2012)

An automated railway system : railway network automation for Bangladesh railway
door: Imtiaz, Abir, et al.
Gepubliceerd in: (2015)

AC sine wave generation by using SPWM inverter
door: Islam, Md. Sakibul, et al.
Gepubliceerd in: (2012)

Reverse load flow analysis
door: Asif, Md. Iqbal Hossain, et al.
Gepubliceerd in: (2014)

Robotic arm manipulator for industrial purpose
door: Moshi, Md. Adnan Al, et al.
Gepubliceerd in: (2011)

System design and circuit implementation of a solar powered car
door: Khatun, Karima, et al.
Gepubliceerd in: (2014)

Virtual Mouse: Design and implementation of an accelerometer based wireless mouse
door: Aryan, Arghya Dev Biswas, et al.
Gepubliceerd in: (2012)

Alternative solar hot water system with multistorage tank
door: Rahman, Md. Asifur, et al.
Gepubliceerd in: (2010)

Performance analysis of a space time block coded MIMO system over faded channel
door: Rahman, Md. Asiqur, et al.
Gepubliceerd in: (2011)