Design and development of a novel medical device using laser molding technology

Design and development of a novel medical device using laser molding technology

This thesis is submitted in partial fulfillment of the requirements for the degree of Bachelor of Pharmacy, 2020.

Бібліографічні деталі
Автор:	Ahmed, Julkernayen
Інші автори:	Uddin, Md. Jasim
Формат:	Дисертація
Мова:	English
Опубліковано:	Brac University 2021
Предмети:	Transdermal delivery Micro-needle Molding technique Laser-engineered Acrylic sheet Transdermal medication
Онлайн доступ:	http://hdl.handle.net/10361/14819

Схожі ресурси

A review on microneedle mediated transdermal drug delivery
за авторством: Al-Sabbir
Опубліковано: (2020)

A review on dissolving microneedle mediated transdermal insulin delivery
за авторством: Akter, Khadija
Опубліковано: (2023)

3D printed microneedle for transdermal drug delivery application
за авторством: Rafa, Nazifa Haque
Опубліковано: (2022)

Transdermal material construction in covid 19 vaccine delivery: a microneedle approach
за авторством: Chowdhury, Tasnia Farheen
Опубліковано: (2021)

Covid-19 vaccine for transdermal delivery: formulation consideration and microneedle accession
за авторством: Md.Minhaj-Ul-Alam
Опубліковано: (2021)

Delivery of Denosumab via Hollow Microneedle
за авторством: Bushra, Fariha
Опубліковано: (2021)

Utilization of liquid crystals for transdermal drug delivery system
за авторством: Mazumder, Madhurza Mitra
Опубліковано: (2022)

3D printed microneedle for vaccine delivery: prospect and application
за авторством: Ahmed, Foysal
Опубліковано: (2022)

Solubility profile of linagliptin: designing of transdermal formulation
за авторством: Hossain, Md. Kaykobad
Опубліковано: (2019)

Fabrication of silver nanoparticles by laser ablation technique: their characterization and uses
за авторством: Haider, A F M Yusuf, та інші
Опубліковано: (2017)

An analysis of human resource activities of laser medical center
за авторством: Karmaker, Partho Protim
Опубліковано: (2017)

Construction of laser raman system using diode laser and Its performance
за авторством: Abedin, Kazi M, та інші
Опубліковано: (2017)

Gold nanoparticles: fabrication by laser ablation technique and their optical and morphological studies
за авторством: Haider, A F M Yusuf
Опубліковано: (2017)

Laser electronics /
за авторством: Verdeyen, Joseph Thomas
Опубліковано: (1995)

Principles of lasers /
за авторством: Svelto, Orazio
Опубліковано: (1998)

Laser fundamentals /
за авторством: Silfvast, William Thomas, 1937-
Опубліковано: (2004)

Elemental profiling and determination of Ti content of the beach sand samples of Bangladesh using LIBS technique
за авторством: Haider, A F M Yusuf, та інші
Опубліковано: (2017)

Astrophysical lasers
за авторством: Letokhov, V. S.

Construction and operation of a dispersive laser raman spectrograph using interference filter
за авторством: Abedin, KM, та інші
Опубліковано: (2017)

Power dependence of size of laser ablated colloidal silver nanoparticles
за авторством: Talukder, A. I., та інші
Опубліковано: (2017)

Laser ionization mass analysis /
Опубліковано: (1993)

Navigational intelligence at river: a laser-based imaging approach for nocturnal vessel detection
за авторством: Zafreen, Zasia, та інші
Опубліковано: (2024)

Investigating client’s benefit and client’s fulfillment by preparing cost sheet and cost assurance: A study on Amrita consumer food products ltd. Barisal
за авторством: Halder, Antara
Опубліковано: (2021)

Laser-induced breakdown spectroscopy and its applications in mineral and pollution analyses
за авторством: Haider, A F M Yusuf, та інші
Опубліковано: (2017)

Determination of ratio of unsaturated to total fatty acids in edible oils by laser Raman spectroscopy
за авторством: Farhad, S. Farid Uddin, та інші
Опубліковано: (2017)

Identification of multiple rare earths and associated elements in raw monazite sands by laser-induced breakdown spectroscopy
за авторством: Abedin, K.M., та інші
Опубліковано: (2017)

Barriers to oral and inhaled drug delivery: a review
за авторством: Kamal, Farhana
Опубліковано: (2023)

Review on: Micro/Nanorobot for targeted drug delivery
за авторством: Rahman, Tania
Опубліковано: (2024)

Job satisfaction of garment workers – A study on Needle Drop Limited
за авторством: Emon, Tareque Habib
Опубліковано: (2022)

Radiative lifetime measurement of excited neutral nitrogen atoms by time resolved laser-induced breakdown spectroscopy
за авторством: Haider, A F M Yusuf, та інші
Опубліковано: (2017)

The economics of health care : an introductory text /
за авторством: McGuire, Alistair
Опубліковано: (1988)

Work order for supply, installation and commissioning of stainless steel sheet cladding on the wall around lift opening for the BRACU new campus project at holding no. Kha 224,Merul Badda,Dhaka-1212.
за авторством: Brac University
Опубліковано: (2023)

Detection of multiple elements in coal samples from Bangladesh by laser-induced breakdown spectroscopy
за авторством: Haider, A F M Yusuf, та інші
Опубліковано: (2017)

The anatomy of the novel /
за авторством: Boulton, Marjorie
Опубліковано: (1975)

Self-micro emulsifying drug delivery system: An approach to improve the solubility of Itraconazole
за авторством: Ahmed, Alifa
Опубліковано: (2023)

Novels in the making.
за авторством: Buckler, William Earl, 1924-
Опубліковано: (1961)

Microcavities

Digitalization and development of a torque sensor based control system and implementation of the algorithm using a micro-controller
за авторством: Shantonu, Omar Shahjalal, та інші
Опубліковано: (2017)

Formulation and evaluation of acetaminophen suspension using fenugreek seeds as a natural suspending agent
за авторством: Khan, Ahmed Tareque
Опубліковано: (2018)

Elemental analyses and determination of lead content in kohl (stone) by laser-induced breakdown spectroscopy
за авторством: Haider, Abul Fazal Mohammed Yusuf, та інші
Опубліковано: (2017)