Design and development of a novel medical device using laser molding technology

Design and development of a novel medical device using laser molding technology

This thesis is submitted in partial fulfillment of the requirements for the degree of Bachelor of Pharmacy, 2020.

Sonraí bibleagrafaíochta
Príomhchruthaitheoir:	Ahmed, Julkernayen
Rannpháirtithe:	Uddin, Md. Jasim
Formáid:	Tráchtas
Teanga:	English
Foilsithe / Cruthaithe:	Brac University 2021
Ábhair:	Transdermal delivery Micro-needle Molding technique Laser-engineered Acrylic sheet Transdermal medication
Rochtain ar líne:	http://hdl.handle.net/10361/14819

Míreanna comhchosúla

A review on microneedle mediated transdermal drug delivery
de réir: Al-Sabbir
Foilsithe / Cruthaithe: (2020)

A review on dissolving microneedle mediated transdermal insulin delivery
de réir: Akter, Khadija
Foilsithe / Cruthaithe: (2023)

3D printed microneedle for transdermal drug delivery application
de réir: Rafa, Nazifa Haque
Foilsithe / Cruthaithe: (2022)

Transdermal material construction in covid 19 vaccine delivery: a microneedle approach
de réir: Chowdhury, Tasnia Farheen
Foilsithe / Cruthaithe: (2021)

Covid-19 vaccine for transdermal delivery: formulation consideration and microneedle accession
de réir: Md.Minhaj-Ul-Alam
Foilsithe / Cruthaithe: (2021)

Delivery of Denosumab via Hollow Microneedle
de réir: Bushra, Fariha
Foilsithe / Cruthaithe: (2021)

Utilization of liquid crystals for transdermal drug delivery system
de réir: Mazumder, Madhurza Mitra
Foilsithe / Cruthaithe: (2022)

3D printed microneedle for vaccine delivery: prospect and application
de réir: Ahmed, Foysal
Foilsithe / Cruthaithe: (2022)

Solubility profile of linagliptin: designing of transdermal formulation
de réir: Hossain, Md. Kaykobad
Foilsithe / Cruthaithe: (2019)

Fabrication of silver nanoparticles by laser ablation technique: their characterization and uses
de réir: Haider, A F M Yusuf, et al.
Foilsithe / Cruthaithe: (2017)

An analysis of human resource activities of laser medical center
de réir: Karmaker, Partho Protim
Foilsithe / Cruthaithe: (2017)

Construction of laser raman system using diode laser and Its performance
de réir: Abedin, Kazi M, et al.
Foilsithe / Cruthaithe: (2017)

Gold nanoparticles: fabrication by laser ablation technique and their optical and morphological studies
de réir: Haider, A F M Yusuf
Foilsithe / Cruthaithe: (2017)

Laser electronics /
de réir: Verdeyen, Joseph Thomas
Foilsithe / Cruthaithe: (1995)

Principles of lasers /
de réir: Svelto, Orazio
Foilsithe / Cruthaithe: (1998)

Laser fundamentals /
de réir: Silfvast, William Thomas, 1937-
Foilsithe / Cruthaithe: (2004)

Elemental profiling and determination of Ti content of the beach sand samples of Bangladesh using LIBS technique
de réir: Haider, A F M Yusuf, et al.
Foilsithe / Cruthaithe: (2017)

Astrophysical lasers
de réir: Letokhov, V. S.

Construction and operation of a dispersive laser raman spectrograph using interference filter
de réir: Abedin, KM, et al.
Foilsithe / Cruthaithe: (2017)

Power dependence of size of laser ablated colloidal silver nanoparticles
de réir: Talukder, A. I., et al.
Foilsithe / Cruthaithe: (2017)

Laser ionization mass analysis /
Foilsithe / Cruthaithe: (1993)

Navigational intelligence at river: a laser-based imaging approach for nocturnal vessel detection
de réir: Zafreen, Zasia, et al.
Foilsithe / Cruthaithe: (2024)

Investigating client’s benefit and client’s fulfillment by preparing cost sheet and cost assurance: A study on Amrita consumer food products ltd. Barisal
de réir: Halder, Antara
Foilsithe / Cruthaithe: (2021)

Laser-induced breakdown spectroscopy and its applications in mineral and pollution analyses
de réir: Haider, A F M Yusuf, et al.
Foilsithe / Cruthaithe: (2017)

Determination of ratio of unsaturated to total fatty acids in edible oils by laser Raman spectroscopy
de réir: Farhad, S. Farid Uddin, et al.
Foilsithe / Cruthaithe: (2017)

Identification of multiple rare earths and associated elements in raw monazite sands by laser-induced breakdown spectroscopy
de réir: Abedin, K.M., et al.
Foilsithe / Cruthaithe: (2017)

Barriers to oral and inhaled drug delivery: a review
de réir: Kamal, Farhana
Foilsithe / Cruthaithe: (2023)

Review on: Micro/Nanorobot for targeted drug delivery
de réir: Rahman, Tania
Foilsithe / Cruthaithe: (2024)

Job satisfaction of garment workers – A study on Needle Drop Limited
de réir: Emon, Tareque Habib
Foilsithe / Cruthaithe: (2022)

Radiative lifetime measurement of excited neutral nitrogen atoms by time resolved laser-induced breakdown spectroscopy
de réir: Haider, A F M Yusuf, et al.
Foilsithe / Cruthaithe: (2017)

The economics of health care : an introductory text /
de réir: McGuire, Alistair
Foilsithe / Cruthaithe: (1988)

Work order for supply, installation and commissioning of stainless steel sheet cladding on the wall around lift opening for the BRACU new campus project at holding no. Kha 224,Merul Badda,Dhaka-1212.
de réir: Brac University
Foilsithe / Cruthaithe: (2023)

Detection of multiple elements in coal samples from Bangladesh by laser-induced breakdown spectroscopy
de réir: Haider, A F M Yusuf, et al.
Foilsithe / Cruthaithe: (2017)

The anatomy of the novel /
de réir: Boulton, Marjorie
Foilsithe / Cruthaithe: (1975)

Self-micro emulsifying drug delivery system: An approach to improve the solubility of Itraconazole
de réir: Ahmed, Alifa
Foilsithe / Cruthaithe: (2023)

Novels in the making.
de réir: Buckler, William Earl, 1924-
Foilsithe / Cruthaithe: (1961)

Microcavities

Digitalization and development of a torque sensor based control system and implementation of the algorithm using a micro-controller
de réir: Shantonu, Omar Shahjalal, et al.
Foilsithe / Cruthaithe: (2017)

Formulation and evaluation of acetaminophen suspension using fenugreek seeds as a natural suspending agent
de réir: Khan, Ahmed Tareque
Foilsithe / Cruthaithe: (2018)

Elemental analyses and determination of lead content in kohl (stone) by laser-induced breakdown spectroscopy
de réir: Haider, Abul Fazal Mohammed Yusuf, et al.
Foilsithe / Cruthaithe: (2017)