Design and development of a novel medical device using laser molding technology

Design and development of a novel medical device using laser molding technology

This thesis is submitted in partial fulfillment of the requirements for the degree of Bachelor of Pharmacy, 2020.

Dades bibliogràfiques
Autor principal:	Ahmed, Julkernayen
Altres autors:	Uddin, Md. Jasim
Format:	Thesis
Idioma:	English
Publicat:	Brac University 2021
Matèries:	Transdermal delivery Micro-needle Molding technique Laser-engineered Acrylic sheet Transdermal medication
Accés en línia:	http://hdl.handle.net/10361/14819

Ítems similars

A review on microneedle mediated transdermal drug delivery
per: Al-Sabbir
Publicat: (2020)

A review on dissolving microneedle mediated transdermal insulin delivery
per: Akter, Khadija
Publicat: (2023)

3D printed microneedle for transdermal drug delivery application
per: Rafa, Nazifa Haque
Publicat: (2022)

Transdermal material construction in covid 19 vaccine delivery: a microneedle approach
per: Chowdhury, Tasnia Farheen
Publicat: (2021)

Covid-19 vaccine for transdermal delivery: formulation consideration and microneedle accession
per: Md.Minhaj-Ul-Alam
Publicat: (2021)

Delivery of Denosumab via Hollow Microneedle
per: Bushra, Fariha
Publicat: (2021)

Utilization of liquid crystals for transdermal drug delivery system
per: Mazumder, Madhurza Mitra
Publicat: (2022)

3D printed microneedle for vaccine delivery: prospect and application
per: Ahmed, Foysal
Publicat: (2022)

Solubility profile of linagliptin: designing of transdermal formulation
per: Hossain, Md. Kaykobad
Publicat: (2019)

Fabrication of silver nanoparticles by laser ablation technique: their characterization and uses
per: Haider, A F M Yusuf, et al.
Publicat: (2017)

An analysis of human resource activities of laser medical center
per: Karmaker, Partho Protim
Publicat: (2017)

Construction of laser raman system using diode laser and Its performance
per: Abedin, Kazi M, et al.
Publicat: (2017)

Gold nanoparticles: fabrication by laser ablation technique and their optical and morphological studies
per: Haider, A F M Yusuf
Publicat: (2017)

Laser electronics /
per: Verdeyen, Joseph Thomas
Publicat: (1995)

Principles of lasers /
per: Svelto, Orazio
Publicat: (1998)

Laser fundamentals /
per: Silfvast, William Thomas, 1937-
Publicat: (2004)

Elemental profiling and determination of Ti content of the beach sand samples of Bangladesh using LIBS technique
per: Haider, A F M Yusuf, et al.
Publicat: (2017)

Astrophysical lasers
per: Letokhov, V. S.

Construction and operation of a dispersive laser raman spectrograph using interference filter
per: Abedin, KM, et al.
Publicat: (2017)

Power dependence of size of laser ablated colloidal silver nanoparticles
per: Talukder, A. I., et al.
Publicat: (2017)

Laser ionization mass analysis /
Publicat: (1993)

Navigational intelligence at river: a laser-based imaging approach for nocturnal vessel detection
per: Zafreen, Zasia, et al.
Publicat: (2024)

Investigating client’s benefit and client’s fulfillment by preparing cost sheet and cost assurance: A study on Amrita consumer food products ltd. Barisal
per: Halder, Antara
Publicat: (2021)

Laser-induced breakdown spectroscopy and its applications in mineral and pollution analyses
per: Haider, A F M Yusuf, et al.
Publicat: (2017)

Determination of ratio of unsaturated to total fatty acids in edible oils by laser Raman spectroscopy
per: Farhad, S. Farid Uddin, et al.
Publicat: (2017)

Identification of multiple rare earths and associated elements in raw monazite sands by laser-induced breakdown spectroscopy
per: Abedin, K.M., et al.
Publicat: (2017)

Barriers to oral and inhaled drug delivery: a review
per: Kamal, Farhana
Publicat: (2023)

Review on: Micro/Nanorobot for targeted drug delivery
per: Rahman, Tania
Publicat: (2024)

Job satisfaction of garment workers – A study on Needle Drop Limited
per: Emon, Tareque Habib
Publicat: (2022)

Radiative lifetime measurement of excited neutral nitrogen atoms by time resolved laser-induced breakdown spectroscopy
per: Haider, A F M Yusuf, et al.
Publicat: (2017)

The economics of health care : an introductory text /
per: McGuire, Alistair
Publicat: (1988)

Work order for supply, installation and commissioning of stainless steel sheet cladding on the wall around lift opening for the BRACU new campus project at holding no. Kha 224,Merul Badda,Dhaka-1212.
per: Brac University
Publicat: (2023)

Detection of multiple elements in coal samples from Bangladesh by laser-induced breakdown spectroscopy
per: Haider, A F M Yusuf, et al.
Publicat: (2017)

The anatomy of the novel /
per: Boulton, Marjorie
Publicat: (1975)

Self-micro emulsifying drug delivery system: An approach to improve the solubility of Itraconazole
per: Ahmed, Alifa
Publicat: (2023)

Novels in the making.
per: Buckler, William Earl, 1924-
Publicat: (1961)

Microcavities

Digitalization and development of a torque sensor based control system and implementation of the algorithm using a micro-controller
per: Shantonu, Omar Shahjalal, et al.
Publicat: (2017)

Formulation and evaluation of acetaminophen suspension using fenugreek seeds as a natural suspending agent
per: Khan, Ahmed Tareque
Publicat: (2018)

Elemental analyses and determination of lead content in kohl (stone) by laser-induced breakdown spectroscopy
per: Haider, Abul Fazal Mohammed Yusuf, et al.
Publicat: (2017)