Novel approaches to low leakage and area efficient VLSI Design

Novel approaches to low leakage and area efficient VLSI Design

his thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electrical and Electronic Engineering, 2011.

Dades bibliogràfiques
Autors principals:	Izma, Tajrian, Barua, Parag, Rahman, Md. Rejaur, Sengupta, Prianka
Altres autors:	Islam, Md. Shafiqul
Format:	Thesis
Idioma:	English
Publicat:	BRAC University 2011
Matèries:	Electrical and electronic engineering
Accés en línia:	http://hdl.handle.net/10361/1469

Ítems similars

Design of an efficient energy harvester from ambient vibration
per: Rahman, Tasfia, et al.
Publicat: (2012)

Mixed FBB and RBB low leakage technique for high durable CMOS circuit
per: Barua, Parag, et al.
Publicat: (2016)

Improvement of efficiency for solar photovoltaic cell application
per: Majumder, Khademul Islam, et al.
Publicat: (2011)

Efficiency of IPS and its effect on Bangladesh Power systems
per: Sarwar, Rashed
Publicat: (2010)

Designing of an office appliance system using temperature sensor & micro controller for efficient use of electricity
per: Das, Rajat, et al.
Publicat: (2013)

Performance improvement of SHWS by increasing thermal efficiency using insulation materials and optimum position of solar collectors
per: Ferdous, Jannatul, et al.
Publicat: (2012)

Low cost marine black box design department of electrical and electronic engineering
per: Abir, Imtiaz Kalam, et al.
Publicat: (2015)

Design and development of a cost effective urban resedential solar PV system
per: Hasan, Fahim, et al.
Publicat: (2011)

Design of a single phase switch mode AC-DC Converter
per: Surjo, Md. Rafiqur Rahman, et al.
Publicat: (2012)

Optimizing cognitive efficiency of emotiv EPOC and controlling wheelchair through it
per: Chowdhury, Pritom, et al.
Publicat: (2015)

Design of a charge controller circuit with Maximum Power Point Tracker (MPPT) for Photovoltaic system
per: Rahman, Shusmita, et al.
Publicat: (2013)

Design a solar clean car
per: Mahfuz, Md. Muntashir Bin, et al.
Publicat: (2012)

Design and implementation of a QPSK demodulator
per: Hasan, Mahabubul, et al.
Publicat: (2011)

A Wireless controlled semi-autonomous fire extinguishing robot to rescue and monitor hazardous
per: Imran Bin, Jafar, et al.
Publicat: (2014)

Design and development of microcontroller based ECG simulator
per: Uzoshi, Khandaker Raska, et al.
Publicat: (2011)

Design of a single phase AC-AC converter
per: Khan, Md. Imtiaz, et al.
Publicat: (2012)

Design and simulation of a solar PV system for BRAC University
per: Eshita, Shaika Tamanna, et al.
Publicat: (2011)

Virtual Mouse: Design and implementation of an accelerometer based wireless mouse
per: Aryan, Arghya Dev Biswas, et al.
Publicat: (2012)

System design and circuit implementation of a solar powered car
per: Khatun, Karima, et al.
Publicat: (2014)

Design of a pure sine wave inverter for PV application
per: Sayeed, Nuzhat Noor, et al.
Publicat: (2011)

System design of a two wheeler self balanced vehicle
per: Rumi, Sheikh Mohibul Islam, et al.
Publicat: (2014)

Performance analysis of a space time block coded MIMO system over faded channel
per: Rahman, Md. Asiqur, et al.
Publicat: (2011)

Designing smart charge controller for the solar battery charging station (SBCS)
per: Ferdausi, Marufa
Publicat: (2013)

Revisiting Carbon Leakage /
per: Misch, Florian
Publicat: (2021)

Design and optimization of vision based light control system for smart departmental store
per: Sen, Shuvashish
Publicat: (2014)

The effects of electric field on microorganisms in semi-liquid and liquid edible food substances
per: Rahman, Adel Basher, et al.
Publicat: (2015)

Designing and empirical realization of horn antennas and waveguides in a 60 GHz wireless system
per: Ayesha, Sk. Laila, et al.
Publicat: (2011)

Design of an often cost affective wind power system for a remote Bangladesh locality
per: Mirza, Rifat, et al.
Publicat: (2011)

Design of photovoltaic power conditioning incorporating maximum power point tracking of solar cell
per: Syeed, Nuzhat Noor, et al.
Publicat: (2011)

Speed limit sign board detection and extraction of digits in different weather conditions
per: Rahman, Khan Hafizur Rahman, et al.
Publicat: (2013)

Performance analysis of a multi-carrier CDMA wireless communication system with channel impairment
per: Rana, Jobayer Anam, et al.
Publicat: (2011)

Design and VLSI implementation of high performance face recognition system
per: Dewan, Priyanka Das, et al.
Publicat: (2013)

Location based service for the mobile users using the GPS technology
per: Rahman, Mir Sazzadur, et al.
Publicat: (2013)

2nd Generation car security system (2GCSS) : Embedded car security system
per: Rahman, Md. Mashiur, et al.
Publicat: (2013)

Non-cash payment method using QR codes in an automated microcontroller-based vending machine
per: Rahman, Md. Shahidur, et al.
Publicat: (2015)

Alternative solar hot water system with multistorage tank
per: Rahman, Md. Asifur, et al.
Publicat: (2010)

Solar powered traffic sensitive automated LED street lighting system
per: Ahmed, Sanjana, et al.
Publicat: (2013)

Development of navigation system for visually impaired person
per: Shaha, Rajesh Kumar, et al.
Publicat: (2013)

Optimal power flow considering line loss
per: Banna, Hasanul, et al.
Publicat: (2015)

Performance analysis of a wireless communication system with smart antenna
per: Sarker, Andre, et al.
Publicat: (2011)